YvEs2005

mpd server

##############################################
pptp:
set ippool add pool2 10.1.1.10 10.1.1.20
# Create clonable bundle template named B
create bundle template B
set iface enable proxy-arp
set iface idle 1800
set iface enable tcpmssfix
set ipcp yes vjcomp
# Specify IP address pool for dynamic assigment.
set ipcp ranges 10.10.10.100/32 ippool pool2
set ipcp dns 192.168.1.1
# set ipcp nbns 192.168.1.4
# The five lines below enable Microsoft Point-to-Point encryption
# (MPPE) using the ng_mppc(8) netgraph node type.
set bundle enable compression
set ccp yes mppc
set mppc yes e40
set mppc yes e128
set mppc yes stateless
# Create clonable link template named L
create link template L pptp
# Set bundle template to use
set link action bundle B
# Multilink adds some overhead, but gives full 1500 MTU.
set link enable multilink
set link yes acfcomp protocomp
# set link no pap chap eap
set link enable chap
set link keep-alive 10 60
set link mtu 1460
set pptp self *
set link enable incoming

#########################################################
pppoe:
set ippool add pool 11.11.11.1 11.11.11.10
create bundle template C
set ipcp ranges 11.11.11.11/32 ippool pool
set ipcp dns 11.11.11.100
create link template N pppoe
set link enable multilink
set link action bundle C
set link enable chap pap
# create link template le0 N
set link max-children 1000
set pppoe iface le0
set link enable incoming

l2tp:
set ippool add pool1 88.88.0.1 88.88.0.99
create bundle template D
set ipcp ranges 88.88.0.254/32 ippool pool1
set ipcp dns 8.8.8.8
create link template M l2tp
set l2tp enable length
set link action bundle D
set link enable chap pap
set l2tp self *
set link enable incoming